Help with Arduino Thermal Camera configuration and assembly

Discussions focused on hardware related
Post Reply
1Aditya
Posts: 1
Joined: Wed Jul 11, 2018 10:40 am

Help with Arduino Thermal Camera configuration and assembly

Post by 1Aditya » Wed Jul 11, 2018 10:48 am

Hello Experts,

I need your help with building and programming thermal imaging camera on Arduino Feather board.
This is a bit urgent, please help.

orbian
Posts: 1
Joined: Wed Jul 11, 2018 1:46 pm

Re: Help with Arduino Thermal Camera configuration and assembly

Post by orbian » Wed Jul 11, 2018 1:47 pm

What camera module are you using?

User avatar
rick.cavallaro
Posts: 1
Joined: Wed Jul 11, 2018 2:27 pm

Re: Help with Arduino Thermal Camera configuration and assembly

Post by rick.cavallaro » Wed Jul 11, 2018 2:33 pm

I will be happy to try and help. Have you already selected the thermal camera that will be used? Do you already have both the camera and arduino? Have you installed the development environment yet? Have you programmed arduinos and used peripherals or sensors before?

I need to get a sense of what kind of help you'll need.

zonker
Posts: 1
Joined: Wed Jul 11, 2018 2:10 pm

Re: Help with Arduino Thermal Camera configuration and assembly

Post by zonker » Wed Jul 11, 2018 2:39 pm

I may be able to help. Which thermal cam are you using, which feather, and what are you trying to do?

John Sokol
Posts: 1
Joined: Sun Jul 08, 2018 4:48 pm

Re: Help with Arduino Thermal Camera configuration and assembly

Post by John Sokol » Mon Jul 23, 2018 10:37 am

We did a whole thing with the Flir Lepton Sensors.

https://www.flir.com/products/lepton/

I had some great success using them.

It just uses an SPI interface and was very easy to interface to a Raspberry Pi or Arduino.

Post Reply